Baluster

1 1/2″ x 1 1/2″ PVC Baluster Moulding

$15.06

Category: .

Product Description

1 1/2″ x 1 1/2″ PVC Baluster Moulding.  Sold in 8′ pieces.

Additional Information

Weight 4 lbs
Dimensions 96 × 1 × 1 in

1-pvc to pvc or pvc to wood- use screws or adhesive

2-recommended screws-drywall screws with large thread or flute

3-recommended adhesive-subfloor adhesive or pvc cement

4-holes can be filled with colored caulk or putty

5-exposure to mixtures of water and muriatic acid used to clean masonry or brick will not affect the surface of the product

  • will not rot
  • resist mildew and fungus
  • excellent “R” value
  • carries a UL-VO-94 fire rating
  • smoke contribution is well below ASTM standards
  • expansion and contraction rate is well below rigid pvc
  • pass slat water exposure at 1000 hours
  • surface hardness is superior to pine
  • screw holding power is superior to pine ASTM
  • painting of pvc is not required for a varying period of time depending on exposure to ultraviolet rays and pollution
  • UV inhabitors are added to compound formulation to slow the fading process

Paint has to be an LRV rating of 55% or higher (NO BLACK)

Acrylic exterior paint is good for a one step process.

Laxtex Paints:

1-Clean surface

2-Use a latex or acrylic primer

3-Finish coat

Oil Base Paints:

1-Lightly sand surface

2-Paint surface with fast drying alkyed primer

3-Allow to dry

4-Apply finish coat